Water mains leak detection in Isle of Anglesey
Water mains leak detection finds hidden leaks in underground supply pipes using acoustic ground microphones, tracer gas and pressure testing.
Non-invasive leak detection
Acoustic, thermal and tracer gas
Trace and access claim reports
What are the signs of a water mains leak?
A meter turning with every tap off, rising bills or wet ground can indicate a leak. ADI Leak Detection Isle of Anglesey locates and marks the leak before digging begins.
A supply pipe leak is underground, so the signs below are usually all you see of it:
- The meter dial moves when every tap and appliance in the house is off
- A water bill that has climbed with no change in how much water you use
- Pressure that drops away when more than one outlet runs
- Wet ground, sinking block paving or a patch of lawn that stays green in July
- A leak notification letter from your water company through the door
If the water is going from the garden watering pipes, irrigation leak detection tests those. A falling pool level calls for swimming pool leak detection to test the pool shell and circulation pipework.
Where do water mains leaks occur in Isle of Anglesey?
Water mains leak detection on the Isle of Anglesey investigates suspected loss from the incoming service to a home or premises.
- The team discusses the reachable supply controls, unusual consumption and any persistent wet ground.
- Detached accommodation is prominent in Benllech, Brynteg on Anglesey and Bull Bay, but the route through each plot needs its own description.
- Explain later paving, extensions and branches to separate structures that may affect access.
- Around Rhostrehwfa, changes in level can be described using the house and its entrances.
- Acoustic listening and pressure testing can help examine the suspected supply section; the surrounding terrain does not establish a pipe fault.
How does ADI Leak Detection Isle of Anglesey find a water mains leak?
The engineer isolates and pressure tests the supply pipe, listens along its route with ground microphones and confirms the leak with tracer gas before marking it. Once the position is found, the engineer explains it on site before any repair is discussed.
The pipe is usually a metre down and the sound of it travels, so tracing it first helps you avoid unnecessary digging.
Pressure testing confirms and measures water loss from the mains pipe. The engineer first isolates the supply at the boundary stop tap, then tests the pipe before tracing the leak.
Acoustic ground microphones pick up the sound of water escaping beneath the surface. The engineer moves them along the pipe route in short steps.
Hydrogen tracer gas is introduced into the isolated mains pipe and detected at the surface above the escape. The engineer uses this method where ground noise or a slab affects the search.
The water mains leak position is marked on the ground and measured back to a fixed point, so whoever digs knows where to open up.
Who fixes a leak on your supply pipe, you or the water company?
Responsibility for a supply pipe changes at the property boundary. Which water company serves your property depends on your town, and each town page names it, its leak line and its published guidance.
- Leak detection in Amlwch
- Leak detection in Menai Bridge
- Leak detection in Llanfairpwllgwyngyll
- Leak detection in Benllech
- Leak detection in Valley
- Leak detection in Gaerwen
- Leak detection in Bodedern
- Leak detection in Llanerchymedd
- Leak detection in Beaumaris
- Leak detection in Cemaes Bay
- Leak detection in Llandegfan
- Leak detection in Trearddur Bay
- Leak detection in Newborough
- Leak detection in Rhosneigr
- Leak detection in Bryn Du
- Leak detection in Dwyran
- Leak detection in Brynsiencyn
- Leak detection in Llanddona
- Leak detection in Llanfechell
- Leak detection in Moelfre
- Leak detection in Penysarn
- Leak detection in Llangoed
- Leak detection in Rhostrehwfa
- Leak detection in Pentraeth
- Leak detection in Brynteg
- Leak detection in Llangristiolus
- Leak detection in Bryngwran
- Leak detection in Pentre Berw
- Leak detection in Gwalchmai
- Leak detection in Cae’r-geiliog
- Leak detection in Rhos-y-bol
- Leak detection in Bull Bay
- Leak detection in Malltraeth
What happens after a water mains leak is found?
Water mains leak repairs by ADI Leak Detection Isle of Anglesey are guaranteed. If the leak is on the water company's side of the boundary stop tap, the report identifies that so you can pass it to them.
Every leak detection visit ends with a written report by the engineer who attended, with photographs and video, formatted for trace and access and escape of water insurance claims.
- The leak position marked on site and explained before you decide anything
- Photographs and video in the written report
How do you arrange water mains leak detection in Isle of Anglesey?
Send the form with your postcode and a technical advisor will call you back, confirm the service and book the visit.
If you are unsure which investigation you need, describe what you can see when you call and the advisor will tell you.
Same or next day depending upon engineer availability.
What do people ask about water mains leak detection?
Four questions come up before a water mains survey: how long it takes, who owns the pipe, whether the driveway gets dug up and how the leak is pinpointed underground.
How long does a water mains leak detection visit take?
It depends on the property and how much of the system has to be tested, so the advisor gives you an estimate when you book.
Who is responsible for a leaking water main in Isle of Anglesey?
Your side of the boundary stop tap is yours and the street side is the water company’s; each town page names the company for that town, and the report says which side the leak is on.
Does finding a water mains leak mean digging up the driveway?
Water mains leak detection traces the pipe from the surface with acoustics, tracer gas and a pressure test. Digging happens once, at the marked point, only if you want the repair done.
What is leak noise correlation?
Leak noise correlation is a way of estimating where a leak sits on a buried pipe. Two sensors are clamped to fittings at either end of the run, the leak noise reaches each one at a slightly different moment, and the time difference gives a distance along the pipe. ADI Leak Detection Isle of Anglesey finds water mains leaks with acoustic ground microphones, tracer gas and pressure testing.
